Coffee Machine Parts & Espresso Accessories, Made to Your Drawing
Custom espresso tools and coffee machine parts, machined to your drawing — any shape, in stainless, aluminium, titanium or wood. We help brands improve the design, add sizes and control cost before production.
- Stainless, aluminium, titanium, wood
- Anodising, bead blast, laser marking
- Free sample for qualified OEM buyers
- 300 pcs MOQ, no tooling charge
Any shape. The right material. A better product before it is cut.
We are a custom machining partner, not a catalogue. Send a drawing, a sample, or even a sketch — we will tell you what is machinable, what it should cost, and how to improve it before you commit to a run.
Any shape
Turned, milled, knurled, threaded, slotted, engraved. If it fits a 4-axis machine, send the drawing — even if it is not on this page.
The right material
304/316 stainless, 6061/7075, Ti-6Al-4V, brass, copper, POM/PEEK, walnut or oak. We recommend what is food-safe, machinable and cost-effective.
We optimize before we quote
DFM on wall thickness, tool access, tolerance stack, assembly and finish. We often remove cost before the first chip.
Grow your SKU line
Same platform, different diameters, colours, handles and logos. Add sizes without new tooling; 300 pcs per SKU.
Fair price
Quoted from material, cycle time, finish and packing — no tooling charge, no brand markup. If a simpler design gets the same result, we will say so.
Low MOQ, free sample
300 pcs per SKU, mixed sizes in one order. One free sample for qualified brand buyers; you cover courier.
Fair price, not the cheapest quote. We quote the process, not the logo. If we can remove a setup, change a material or simplify a finish without hurting the part, that option goes in the quote.
Coffee parts we machine for brands
These are the parts we make most often — not a fixed catalogue. Send your own shape, size and material; we will quote it and tell you how to make it better.
Espresso tampers
58.5 / 54 / 53 / 51 mm bases, flat or convex, stainless base with aluminium, stainless or wood handle.
Distributors & levelers
Adjustable depth, 3–4 blade bottom, anodised body, laser-marked scale.
Dosing funnels
58 / 54 / 53 mm lips, billet aluminium or stainless, anodised or bead-blasted.
Dosing cups
Turned 304 stainless or anodised aluminium, 58 mm mouth, stackable.
WDT tools
0.3–0.4 mm needles, 6+6 or 9+9, knurled aluminium or wood handle.
Portafilter handles
M8/M10/M12 thread inserts, stainless ferrule, walnut/oak wood or all-metal.
Tamper stations
Milled aluminium base, stainless posts, drip tray, custom logo.
Grinder parts & assemblies
Machined bodies, knobs, dials and burr carriers; complete hand grinders on request.
Image placeholders: replace each grey block with your product photo. Recommended size 1200 × 900 px, white or light grey background.
From drawing to finished, packed parts
1. Drawing, sample or sketch
Send a STEP/PDF, a physical sample, or a sketch. We check fit, thread, food-contact surface and assembly before quoting.
2. DFM + free sample
We flag thin walls, deep pockets, tolerance stack and tool marks, propose material or finish alternatives, then machine one free sample for qualified buyers.
3. Production + your brand
300 pcs per SKU, anodised or bead-blasted, laser-marked, bagged or boxed under your brand. Add sizes or colours without new tooling.
Food-contact materials, premium finishes
Stainless for the parts that touch coffee; aluminium for colour and weight; titanium for the top end; walnut or oak for warmth.
What we hold on coffee parts
| Feature | Typical call |
|---|---|
| Tamper base diameter | 58.50 mm with 0.10–0.20 mm basket clearance |
| Base flatness | 0.05 mm |
| Bore / bore fit | IT7 where a bearing or sleeve is pressed |
| Thread | M8 / M10 / M12, checked with go/no-go gauge |
| Surface finish | Ra 0.8–1.6 µm on contact faces |
| Wood moisture | 8–10%, stainless thread insert |
| MOQ | 300 pcs per SKU |
Typical values — confirm on your drawing. We do not claim ISO 9001; we supply material certificates and CMM first-article reports.
Machining, wood and finishing in one chain
4-axis, not 3-axis re-clamps
Bores, slots and bolt patterns on more than one face stay in one setup. 19 of our 32 centres are four-axis.
Metal + wood
We turn and mill the metal, machine the wood handle, fit the stainless thread insert and assemble. One supplier, one tolerance chain.
CMM first article
Bore, flatness, thread and concentricity measured before the run continues. Report as PDF with the first shipment.
Coffee OEM questions
What is your MOQ?
300 pcs per SKU for a first run. Mixed sizes (51/53/54/58.5 mm) can be combined in one order. One sample is free for qualified brand buyers; you cover courier.
Can you make wood handles?
Yes. Walnut, oak and maple, turned and finished with food-safe oil/wax, with a stainless M8/M10 thread insert. We do not recommend dishwasher use for wood.
Do you make the whole tamper or only the base?
Both. We machine the stainless base, the aluminium or wood handle, the thread and the assembly. We can also supply bases only for your existing handle line.
Can you match a sample or a competitor part?
We can work from a sample or a drawing, but we will not copy a patented shape or trade dress. Send the drawing; we will flag any IP or fit issue before quoting.
What about food-contact compliance?
We supply material certificates and can arrange food-contact testing through our finishing partner. Stainless 304/316 is the simplest route; anodised aluminium and wood need the right sealing and care instructions.
What is the lead time?
Samples 7–10 working days after drawing approval. Production typically 15–25 working days depending on finish and quantity.
Can you make a shape that is not shown on this page?
Yes. The page shows what we make most often, not a fixed catalogue. Send a drawing, a sample or a sketch; if it can be turned or milled, we can quote it.
Can you help improve my product or reduce the cost?
Yes. We review wall thickness, tool access, tolerance stack, material, finish and assembly before quoting. If a different material or a simpler feature gets the same result for less, we will put that option in front of you.
Can you add more sizes, colours or SKUs?
Yes. Most coffee tools are a platform: change the diameter, handle, colour, logo or packaging. That usually means new programs, not new tooling. 300 pcs per SKU; mixed sizes can ship in one order.
Is your price the cheapest?
Not always — we quote a fair price for the process, not the lowest possible number. No tooling charge and no brand markup. If we can remove a setup or simplify a finish, we pass that saving on and explain where the cost comes from.
Send a drawing or ask for a free sample
Tell us the part, the material and the annual quantity. We will reply within 16 hours with a sample plan and a cost range.